Zero Speed Switch Sensor Model ZS09P

The Phares Electronics ZS09P Zero Speed Switch Sensor reacts quickly if your conveyor or other industrial machinery stops abruptly. Stop conveyor “domino” effect promptly before things get out of hand. The ZS09P Zero Speed Switch Sensor detects both magnetic and high iron content targets, such as a gear tooth, bolt head, key stock, etc.

Phares Electronics Zero Speed Switch Sensor Model ZS09P self-contained sensor and relay

  • Compact, self contained zero speed switch sensor with relay
  • No additional control box needed
  • Isolated relay contacts switch up to 5 amps
  • 120 VAC or 6-24 VDC
  • Over speed, under speed or zero speed detection
  • Contact arrangements: N.O./N.C. (form ‘C’), N.O. only, or N.C. only
  • LED indicators for instant visual confirmation
  • Precision trim pot for accurate relay set point adjustment
  • Aluminum housing – other materials available
  • Made in the U.S.A.

This little sensor is big enough to help protect your expensive machinery from major malfunctions and minor mishaps.

You will not be disappointed with its performance!
 

Available locally at CED/Raybro Tampa, FL

et your questions answered promptly at 727-444-0406.


Part Numbers For Zero Speed Switch Sensor Model ZS09P

Part Number

Relay Output

Relay Contact Rating

Input Voltage

ZS09P1-120N.O./N.C. (Form 'C')5 Amps120 VAC
ZS09P2-120N.O.5 Amps120 VAC
ZS09P3-120N.C.5 Amps120 VAC
ZS09P1-DN.O./N.C. (Form 'C')5 Amps6-24 VDC
ZS09P2-DN.O.5 Amps6-24 VDC
ZS09P3-DN.C.5 Amps6-24 VDC

 

Data Sheets:

 

Overview

The Phares Electronics Zero Speed Switch Sensor Model ZS09P is a rugged, all-in-one device that combines sensor and relay, for use in over speed, under speed, or zero speed monitoring. Install on augers, bucket elevators, conveyors, exhaust fans, grinders, turbines, windmills and many other applications where shaft speed monitoring is needed. It has an adjustable set point for precise, accurate speed measurement, and reacts quickly if your machine stops abruptly.

The ZS09P Zero Speed Switch Sensor looks like a prox switch, but incorporates intelligent speed sensing circuitry not found in simple on/off devices. When machine shaft speed reaches the set point, the ZS09P Zero Speed Switch relay output changes state. It remains in this state until under speed or zero speed condition occurs.

Phares Electronics Zero Speed Switches have isolated relay contacts making it easy to incorporate into new or existing systems, or to replace obsolete zero speed switch sensors. Get your questions answered promptly at 727-444-0406.

 

Specifications

Power Requirements:
Part No. ZS09P-120: 120VAC, 20mA, 50/60Hz
Part No. ZS09P-D: 6-24VDC, 69mA

Relay Output: (specify when ordering)
SPDT Form ‘C’ dry relay contact (Normally Open/Closed)
SPST Normally Open
SPST Normally Closed

Contact ratings:
5A, 240VAC
5A, 30VDC
Vibration resistance (function) NO/NC contact >15/5g
Shock resistance (destruction) >100g

Operating Frequency:
Hall Effect and Inductive (Geartooth): 0.02Hz – 10kHz
Hall Effect Only: 0.02Hz – 25kHz

Sensing Distance (Gap):
1/16″ to 1/8″ using Geartooth Wheel, Bolt Head, Key Stock, etc.
1/8″ to 1/4″ using Magnetic Disk.
1/8″ to 5/8″ using Magnet or Magnetic Disk.
(Magnetic target sensing distance based on Phares Electronics Magnetic Disks and magnet types).

Minimum Geartooth Sizes:
1/8″ geartooth length, width, depth and gap.

Geartooth Material:
High ferrous (iron) content.

Operating Temperature:
-40°F to 140°F

Weight:
6 oz.

Cable:
4 ft., 6 conductor, 22 AWG, unshielded
(Custom cable lengths available.)

Dimensions (in inches)

Phares Electronics Zero Speed Switch Sensor Model ZS09P Dimensions

Figure 1. Dimensions of Phares Electronics Zero Speed Switch Sensor Model ZS09P

Wiring Connections

Phares Electronics Zero Speed Switch Sensor Wiring Connections

Figure 2. Phares Electronics Zero Speed Switch Sensor wiring connections.

There are LED indicators for Relay and Pulse. Relay LED illuminates when the Relay is energized. Pulse LED illuminates whenever the ZS09P detects a target. The set point is adjusted via trim pot.

 

Sensor Targets suitable for the ZS09P Zero Speed Switch Sensor

The ZS09P Zero Speed Switch Sensor requires a target suitable for sensing in order to measure speed. Sensor targets are sold separately.

Suitable targets are:
Magnetic Disk
Geartooth Wheel
Split Coupling
Bolt head or key stock

 

Sensor Target Illustrations

Phares Electronics Zero Speed Switch Sensor and Magnetic Disk, Axial Orientation Illustration Phares Electronics Zero Speed Switch Sensor and Magnetic Disk, Radial Orientation Illustration

Figures 3 and 4. Phares Electronics Zero Speed Switch Systems consisting of Zero Speed Switch Sensor and Magnetic Zero Speed Switch Sensor Targets.

Phares Electronics Zero Speed Switch Sensor with Geartooth Wheel, Radial OrientationFigure 5. Phares Electronics Zero Speed Switch Sensor and Geartooth Wheel sensor target.

 

Phares Electronics on Twitter Phares Electronics Linkedin