Phares Electronics Digital Output Geartooth Sensors

Phares Electronics Digital Output Geartooth Sensors

Phares Electronics Digital Output Geartooth Sensors are ferrous (iron) detecting devices with extremely accurate gear edge detection.  They are some of the most robust and reliable industrial sensors on the market today.  Phares Geartooth Sensors are designed for, shall we say, “less than desirable” environments, such as high temperature, wash down areas, outdoor, oil, dust, dirt, corrosive, heavy vibration and more.  Of course, they work in clean environments as well!  Phares Geartooth Sensors have 1/2″ NPT threads which conveniently seal to 1/2″ conduit.

Phares Electronics Digital Output Geartooth SensorsDownload or view as PDF:

 

Phares Geartooth Sensors are designed for industrial speed monitoring utilizing a wide variety of gear shapes and sizes. They detect other ferrous (iron) targets as well, such as bolt heads, key stock, etc., and also detect magnetic targets.

The digital output is a square-wave signal that is directly proportional to the input (linear). The digital output signal is compatible with logic inputs (PLC, VFD, DCS, etc.) and other devices that can measure frequency directly. This includes Phares Industrial Tachometers and Motion Detector Modules.

Phares Electronics Digital Output Geartooth Sensors have an NPN (sinking) output; PNP (sourcing) output is available.

Phares Geartooth Sensors are very similar in appearance to our Hall Effect Sensors.  The difference is that the Phares Geartooth Sensors have a flat side on the barrel for sensor orientation.  See Figure 2 and Figure 3 below.

Phares Electronics Mini Geartooth Sensors

Phares Electronics Mini Greartooth Sensor and Dimensions

Part Number

Barrel Length

Cable Length

Operating Temperature

MGS0403-013"1'-40° F to 140° F
MGS0403-063"6'-40° F to 140° F
MGS0403-103"10'-40° F to 140° F
MGHTS0403-013"1'-40° F to 300° F
MGHTS0403-063"6'-40° F to 300° F
MGHTS0403-103"10'-40° F to 300° F
Custom cable lengths available!

 

Phares Electronics Geartooth Sensors with 1″ Long Barrel

Phares Electronics Digital Output Geartooth Sensor 1'' Long Barrel

Part NumberBarrel LengthCable LengthOperating Temperature
GS0401-011"1'-40° F to 140° F
GS0401-061"6'-40° F to 140° F
GS0401-101"10'-40° F to 140° F
GHTS0401-011"1'-40° F to 300° F
GHTS0401-061"6'-40° F to 300° F
GHTS0401-101"10'-40° F to 300° F
Custom cable lengths available!

 

Phares Electronics Geartooth Sensors with 1.5″ Long Barrel

Phares Electronics Digital Output Geartooth Sensor 1.5'' Long-Barrel

Part NumberBarrel LengthCable LengthOperating Temperature
GS0415-011.5"1'-40° F to 140° F
GS0415-061.5"6'-40° F to 140° F
GS0415-101.5"10'-40° F to 140° F
GHTS0415-011.5"1'-40° F to 300° F
GHTS0415-061.5"6'-40° F to 300° F
GHTS0415-101.5"10'-40° F to 300° F
Custom cable lengths available!

 

Phares Electronics Geartooth Sensors with 2″ Long Barrel

Phares Electronics Digital Output Geartooth Sensor 2'' Long Barrel

Part NumberBarrel LengthCable LengthOperating Temperature
GS0402-012"1'-40° F to 140° F
GS0402-062"6'-40° F to 140° F
GS0402-102"10'-40° F to 140° F
GHTS0402-012"1'-40° F to 300° F
GHTS0402-062"6'-40° F to 300° F
GHTS0402-102"10'-40° F to 300° F
Custom cable lengths available!

 

Phares Electronics Geartooth Sensors with 3″ Long Barrel

Phares Electronics Digital Output Geartooth Sensor 3'' Long Barrel

Part NumberBarrel LengthCable LengthOperating Temperature
GS0403-013"1'-40° F to 140° F
GS0403-063"6'-40° F to 140° F
GS0403-103"10'-40° F to 140° F
GHTS0403-013"1'-40° F to 300° F
GHTS0403-063"6'-40° F to 300° F
GHTS0403-103"10'-40° F to 300° F
Custom cable lengths available!

 

Phares Electronics Geartooth Sensors with 4″ Long Barrel

Phares Electronics Digital Output Hall Effect Sensor 4'' Long Barrel

Part NumberBarrel LengthCable LengthOperating Temperature
GS0404-014"1'-40° F to 140° F
GS0404-064"6'-40° F to 140° F
GS0404-104"10'-40° F to 140° F
GHTS0404-014"1'-40° F to 300° F
GHTS0404-064"6'-40° F to 300° F
GHTS0404-104"10'-40° F to 300° F
Custom cable lengths available!

 

Installation

Most of the Phares Geartooth Sensors can be secured via ½” conduit fitting, bracket, or both. Various sensor housing lengths allow greater flexibility regarding mounting and bracket location. Use our Terminal Strip Assembly (TSA) Box for quick mounting and termination, and applications that require long cable runs.

Phares Electronics Digital Output Hall Effect Sensor Wiring DiagramFigure 1. Wiring Diagram

Phares Electronics Digital Output Geartooth Sensors are very similar in appearance to our Hall Effect Sensors.  The difference is that the Phares Geartooth Sensors have a flat side on the barrel for sensor orientation.

Phares Electronics Geartooth Sensor Flat SideFigure 2. Sensor barrel has flat side for easy indexing.
Phares Electronics Geartooth Sensor Orientation-to-Target

Figure 3. Sensor orientation to target.

Web Analytics